ClickCease

Chimney Inspections: when level 2?

There are several specific circumstances in which a Level 2 inspection is appropriate, including a change in ownership of the home, a change in the appliance or fuel type (for example if a gas insert is being installed), before the installation of a flue liner, or after a weather or fire event that may have caused damage. 

A Level 2 inspection will include all elements of a Level 1 inspection and more. Some of the additional activities the inspector will carry out include (but are not limited to) the following:
  • examine the "accessible" portions of the fireplace, chimney, and associated appliances, possibly with the use of tools or a ladder
  • use a video scanner to inspect the interior of the chimney, looking for any cracks or missing mortar
  • check the ash pit for any combustibles under the firebox floor
  • closely inspect the smoke chamber for any irregularities and to verify the walls are parged smooth
  • check for appropriate expansion joints in between the metal side walls of fireplace units and adjacent masonry
  • inspect for rust or damage in any metal components
  • in the attic, check for proper clearances and that there is no insulation or wires in contact with the chimney; additionally check for indications of water damage
  • on the roof, inspect all elements of the chimney structure above the roofline, including the crown, flashing, and cap

On conclusion of the inspection, an official report will be sent to you via e-mail that includes time-stamped photos, a summary of findings, any code violations observed, and, if applicable, an estimate for repair.
To schedule call 612-806-6970 or Contact Us.

Chimney repair estimate + consult

Chimney repair can be a major expense, and the quality of workmanship has a direct impact on your home's safety and value. We know you want to get it right. Our estimate + consult is designed to give you the tools you need to make an informed decision about your chimney repair project. 

Reach out

info@mnchimney.com
612-806-6970
M-F, 8 a.m. - 5 p.m.
Copyright 2023 Minnesota Chimney Corporation | 4800 Mustang Circle, #3, Mounds View, MN 55112 | 612-806-6970​ | info@mnchimney.com | Saxton Air Duct Cleaning is a registered DBA of Minnesota Chimney Corporation. Minnesota Chimney is a licensed builder by the state of Minnesota (BC783628), including a mechanical bond (62090), Certified Chimney Professional and Certified Chimney Reliner by the NCSG (National Chimney Sweep Guild), certified as factory-trained HeatShield Installers, and fully insured by Western National.